RW409 Sensor Tester & Simulator
The RW409 Kit
The RW409 is the perfect companion for any scanner, whether Launch, Autodiagnos or another brand.
Not only can it measure the output from any sensor, be it in volts, resistance or frequency, it can also simulate such an output, as well as verifying the basic functioning of the ECU.
A typical scenario would be to "inject" a voltage, representing the correct output of a coolant temperature sensor, whilst, at the same time, using the "live readings" function of your scanner, to see the results.
As you soon as you get the RW409 in your hands, you can tell how good its quality is. With every necessary lead and probe supplied, together with a useful charger, all housed in a smart carrying case, the RW 409 is an essential, long-lasting, tool for any garage.
Features
- DC voltage, lambda, frequency and pulse signals can be measured
- Digital display shows actual output of signals
- Measures any voltage AC or DC, resistance or frequency output
- Simulates temperature sensors, throttle potentiometers, switches, air flow meters, lambda/oxygen sensors, etc etc
- Features AC voltage output to simulate vehicle speed sensors (VSS), cam, crank and ignition reluctors
- Simulates actual working conditions for any sensor without having to remove it from the vehicle e.g: A.B.S., Crank, Cam, Coolant, Oxygen, MAP, MAF, MAT, VSS, etc
Checks basic ECU operation: controlling the signals being produced allows you to check ECU response and operation. This prevents mis-diagnosis where the fault may lie in the ECU itself or in the wiring between the component and the ECU. Works independently or with any scan tool.
Can be used on any domestic or import vehicle. Eliminates unnecessary replacement of non-defective sensors. Can drive computer into "open" or "closed" loop.
The RW409 Sensor Tester & Simulator costs £199.00
You can Buy On-Line for just £193.03 plus VAT, thats a saving of 3%.
Order now by phoning 01786 451818 or add the item to your shopping basket by clicking the button below.